Password Entry; System Parameter Setting; Language Setting - Sungrow SG50KTL-M-20 User Manual

User Manual
10.8

Password Entry

Parameter setting is password-protected. To set the parameters, you should enter
the correct password.
Press ENTER
Step 1

Press to move the cursor to "Set-param" item and confirm by pressing
Step 2
.
ENTER
A password confirmation screen will occur.
Step 3

Press to move cursor right and Press
input the password 111111.
Press
Step 4 ENTER
enter the "Set-param" sub menu.
10.9

System Parameter Setting

There are various user settable system parameters. You can set the system
parameters after entering the correct password.

10.9.1 Language Setting

Main Screen (Press ENTER)→Menu (Press ×3) →Set-param (Press ENTER)→Enter
password (Press ENTER)→Sys-param (Press ENTER, Press )→Languages (Press ENTER)
If Auto is selected for languages, the
inverter system language will be the
language of the country selected
to enter the Menu screen.
to confirm the password and
10 Operation of LCD Display

to
73