Language Setting; Conventional Way - Sungrow SG2500-MV System Manual

System Manual
Button
←
Clr
Esc
Enter
Max./Min.
If the input password is 1111, user can enter into the normal parameter setting page and set
the system parameters, running parameters, protection parameters and communication
parameters.
Press "Enter" to confirm the password input.
Step 5
If the password is incorrect, an "Error password" window will appear. Tap "Enter" and
Step 6
re-enter the password.

9.5 Language Setting

User can set the language by either of the following two ways:

9.5.1 Conventional Way

Tap "Function" from the default menu;
Step 1
Tap "Set-parameter";
Step 2
Tap "Sys-parameter" after entering the correct password;
Step 3
Tap "Language & Firmware Ver." and enter into the language and firmware version
Step 4
sub-menu;
Function
backspace key, delete the digit input
clear the digitals input
escape and close the keypad
confirm the password input
the maximum and minimum value can be input; digital outside this range is
invalid
9 LCD Menu Operation
55