Connecting The Ac Adapter - Epson TM-H6000IV-DT Technical Reference Manual

Connecting the AC Adapter

WARNING
CAUTION
Connect the AC adapter to this product by the following procedure.
1
Make sure that the power to the printer is turned off and that the AC adapter power
cord is unplugged from the wall socket.
2
Connect the DC cable of the AC adapter to the DC-In connector on the product.
3
Firmly insert the connector of the AC cable all the way into the AC inlet on the AC
adapter.
4
Firmly insert the plug all the way into the grounded wall outlet.
5
Set the AC adapter so that its label side is facing down.
• Be sure to use the specified AC adapter (AC adapter, T).
If you use a non-standard AC adapter, there is a risk of causing fire or electric shock.
• If an abnormality arises despite using this product's attachments, immediately turn the power
off and remove the power cord from the wall socket.
• When connecting or detaching the AC adapter to and from this product, remove the AC
adapter's power cord from the wall socket.
If the power cord is not removed, there is a risk that the adapter and/or this product will be
damaged.
Use the AC adapter separated from the main unit.
Chapter 2 Printer Functions and Settings
2
27