Settings - Web Service Settings - Key Input Device - Epson TM-H6000IV-DT Technical Reference Manual

Settings - Web service settings - Key input device

Performs the settings for the key input device controlled by TM-DT Software.
You can set the key input devices when you have set [Enable] under [Device control] in the
vice settings - Startup settings" (page 98)
Item
Device ID
Device name
Control script
Add
Registered key input devices
Operating test
Delete
Chapter 4 System Development Using TM-DT Software
Description
Set the ID for the key input device.
Set the device name for the key input device.
Set the device control script to control the key input device.
Register device control scripts as necessary. For details, refer to
- Web service settings - Control script - Add/delete" (page
Registers the key input device.
Displays a list of registered key input devices.
Performs an operating test for a registered key input device.
1. Click to display the "Operating Test" window.
2. Operate the key input device.
3. Confirm that correct operation is performed.
Deletes a registered key input device.
"Settings - Web ser-
"Settings
103).
4
101