Settings - Web Service Settings - Web Content - Update Settings - Epson TM-H6000IV-DT Technical Reference Manual

Settings - Web Service settings - Web Content - Update settings

Performs settings for the installation method and update settings for the Web content registered on this prod-
uct.
You can set the automatic update when you have set [Enable] under [Automatic update of web content] in the
"Settings - Web service settings - Startup settings" (page 98)
Item
Automatic update Update schedule
settings
ID
Password
File URL
Server Authentication
Apply
After setting settings,
update Web content
immediately
Manual update Web content file
(*.zip)
Upload
∗ This can be used in TM-DT software Ver.3.0 or later.
Chapter 4 System Development Using TM-DT Software
.
Description
Set the schedule for automatic update of the Web content.
Sets ID for identifying this product at the Web server.
This ID will be the user ID used for Digest authentication. This set value
will also be passed as an ID parameter value for the form data posted to
the server.
Sets password used for Digest authentication.
Specify a URL for the file to automatically update.
After designating it, click "Access test" and check if the URL is properly
specified.
Sets whether or not to conduct server authentication based on the regis-
tered certificate when conducting access by https.
Registers the automatic update settings on this product.
After the automatic update settings are registered on this product, the
Web content will be updated.
Specifies the registered Web content.
Uploads the specified Web content.
4
106