Epson TM-H6000IV-DT Technical Reference Manual page 75

1
Devices A to C request printing of data A to C almost simultaneously.
2
The TM-DT software saves the print data in the spooler in the order it receives it, and
returns the printing results (JobID, printing result = true) to each device.
3
Each device application completes the printing process and executes the next opera-
tion.
4
This product successively prints print data A to C.
5
The TM-DT software saves the printing results (JobID, printing result = true) in the
log.
• If the printer cannot print because it is offline or there is an error, print data cannot be printed
even if spooled. Since printing results are logged, they can be confirmed from the application.
For the confirmation method, see
• When power to this product is turned off, the spooler saved fields are erased.
• If the print data exceeds the remaining capacity of the spooler and cannot be spooled, the
print data is erased. Concerning the spooler capacity, see
(page
"Checking the print results" (page
124).
Chapter 4 System Development Using TM-DT Software
77).
"TM-DT Software Specification"
4
75