Connecting The Ac Adapter - Epson TM-T88VI-DT2 Technical Reference Manual

Connecting the AC Adapter

Follow the steps below to connect the AC adapter.
WARNING
1
Firmly insert the DC connector of the AC adapter all the way into the DC-in connector
on the product. (➀ in the illustration)
2
Firmly insert the connector of the AC cable all the way into the AC inlet on the AC
adapter. (➁ in the illustration)
3
Firmly insert the plug all the way into the grounded wall outlet. (➂ in the illustration)
4
Set the AC adapter so that its label side is facing down.
Be sure to use the specified AC adapter [AC Adapter, T1(Model: M284B)] only.
Be sure to leave a space between the AC adapter and the main unit.
Chapter 2 Setup
2
23