Settings - Web Service Settings - Printer - Epson TM-H6000IV-DT Technical Reference Manual

Settings - Web service settings - Printer

Performs the settings for printers controlled by TM-DT Software.
You can set the printers when you have set [Enable] under [Device control] in the
tings - Startup settings" (page 98)
Item
Device ID
Type
Model no.
IP address
Retry interval
Add
Registered printers
Test printing
Operating test
Delete
Operating Test
Item
Receipt Test Printing
Slip Start printing
Cancel printing
Endorsement Start printing
Cancel printing
MICR Pull-down menu
Start reading
Cancel reading
Eject
Close
Chapter 4 System Development Using TM-DT Software
Description
Set the ID for the controlled printer. (Any character string)
The initial value for the device ID for the printer equipped in this product
is "local_printer".
Select the type for the controlled printer.
Select the model number for the controlled printer.
Set the printer IP address for each device ID.
Set the timeout retry interval.
Adds the printer on this product.
Displays a list of registered printers.
Performs a test printing. "TEST_PRINT" is printed.
Click "Operating test" to display the "Operating test" window. Perform an
operating test for the hybrid printer.
For details, refer to "Operating Test" (page
Deletes a registered printer.
Description
Perform a test printing. "TEST_PRINT" is printed.
Perform a slip printing test. "TEST_PRINT" is printed.
Cancels printing.
Performs an endorsement printing test. "TEST_PRINT" is printed.
Cancels printing.
Select a reading format.
Starts reading.
Cancels reading.
Ejects paper.
Closes the window.
"Settings - Web service set-
99).
99
4