Settings - Web Service Settings - Server Access - Device Data Notification - Epson TM-H6000IV-DT Technical Reference Manual

Settings - Web Service settings - Server access - Device Data Notification

Performs settings for device data notification.
This can be used in TM-DT software Ver.3.0 or later.
You can set the device data notification when you have set [Enable] under [Device Data Notification] in the
"Settings - Web service settings - Startup settings" (page 98)
Item
Settings Server ID
access
Password
URL
Server Authen-
tication
Box ID
POST Error Print Message
Message Text
Text Attributes
Cut
Capture Devices
Devices
Apply
Chapter 4 System Development Using TM-DT Software
.
Description
Sets the ID for identifying this product on the Web server side.
This ID becomes the user ID used for Digest authentication. The set value
is also passed as the ID parameter value of the form data to be posted to
the server.
Specify the password to be used for Digest authentication for the server.
Set the web server URL and path to applications.
Ex: After specifying http://[Web server IP address]/Test_device.php, click
[Access Test] and confirm whether or not access is possible.
Sets whether or not to conduct server authentication based on the regis-
tered certificate when conducting access by https.
Specifies the BoxID of the communication box.
Sets whether or not to print an error message when Post fails.
Sets whether or not to print an error message when Post error occurs.
Sets the character string of the error message.
Sets the text decoration of the error message.
Sets whether or not to cut the paper.
Selects the device for using device data notification.
Registers the settings to this product.
4
109