USB Interface Printer
Connect the USB interface TM printer to a USB connector. For printer settings, see the "Technical Reference
Guide" of each TM printer.
• PC-POS System
Set the driver, etc. according to each system of use. For details, see
126.
Systems that use TM-DT software cannot be used.
Fix the USB cables with wire saddles to prevent detachment.
Network printer
Network printers are connected to the same network as this product. For printer settings, see the "Technical
Reference Guide" of each TM printer.
• PC-POS System
Set the driver, etc. according to each system of use. For details, see
126.
• Systems that use TM-DT software
Set the device ID, IP address, printer model, and other settings with EPSON TMNet WebConfig. For details,
see
"Settings - Web service settings - Printer" on page
Customer display
Connect the customer display (optional) to a USB connector.
For how to connect the customer display and make dip switch settings, etc., see the "Technical Reference Guide"
of each customer display.
• PC-POS System
This product is installed with a customer display COM-USB conversion driver, so it is recognized as a virtual
COM port.
Set the driver, etc. according to each system of use. For details, see
126.
• Systems that use TM-DT software
Set whether or not to use the customer display, communication speed and so on with EPSON TMNet Web-
Config. For details, see
"Settings - Web service settings - Customer Display" on page
Fix the USB cables with wire saddles to prevent detachment.
Chapter 2 Printer Functions and Settings
"PC-POS System Development" on page
"PC-POS System Development" on page
99.
"PC-POS System Development" on page
100.
44
2