Settings - System Settings - Network - Wireless Lan - Tcp/Ip; Settings - System Settings - Security - Ssl - Epson TM-H6000IV-DT Technical Reference Manual

Settings - System settings - Network - Wireless LAN - TCP/IP

Performs settings for a wireless LAN such as IP address when the optional wireless LAN cable set (OTWL01) is
used.
Item
Get IP Address
IP Address
Subnet Mask
Default Gateway
Acquire DNS Server Address Automatically
DNS Server Address(in order of use)
Print IP Address *
Apply
∗ This can be used in TM-DT software Ver.3.0 or later.

Settings - System settings - Security - SSL

Performs SSL settings for this product.
Item
Disable
Remove the certificate
Enable
Create the self signed
certificate
Update the certificate
Private key file
Certificate file
Certificate chain file(Option)
Apply
Chapter 4 System Development Using TM-DT Software
Sets the method of getting the IP address.
Sets the IP address when [Get IP Address] is set to [Manual].
Sets the subnet mask when [Get IP Address] is set to [Manual].
Sets the default gateway when [Get IP Address] is set to [Manual].
Sets the method of getting the address of the DNS server when [Get IP
Address] is set to [Auto].
Sets the addresses of the DNS server in order of usage when [Acquire
DNS Server Address Automatically] is set to [Disable].
When this setting is [Enable], if [Get IP Address] is set to [Auto], the IP
address is printed when it is acquired.
Registers the settings to this product.
Description
Disables SSL authentication.
Select this checkbox to delete the SSL certificate.
It can only be selected when the SSL setting is [Disabled].
Enables SSL authentication.
Create a self signed certificate to be registered to this product.
It can only be selected when the SSL setting is [Enabled].
Renews certificates registered to this product.
It can only be selected when the SSL setting is [Enabled].
Selects private key files registered to this product.
It can only be selected when the SSL setting is [Enabled].
Selects server certificate files registered to this product.
It can only be selected when the SSL setting is [Enabled].
Selects certificate chain files registered to this product.
It can only be selected when the SSL setting is [Enabled].
Registers the settings to this product.
Description
4
112