Chapter 2 Before Betting Up; Connecting The Ac Adapter To The Printer - Epson TM-300A Operator's Manual

Chapter 2 Before Setting Up

2-1 Connecting the AC adapter to the Printer

n Plugging in AC adapter
CAUTIONS:
Before connecting the printer to the power supply, make sure that the
l
voltage and power specifications match the printer's requirements.
Using an incorrect power supply can cause serious damage to the printer.
l
Connect the AC adapter according to the following procedure.
Make sure the printer is turned off.
Plug the power cable connector into the printer's power connector with the ar-
row mark facing upward. (You can remove the power cable by grasping the
connector firmly at the arrow mark and pulling straight out.)
Plug the power cord into the outlet, and turn on the power.
Be sure to ground the printer with the frame ground screw on the board at the
rear side of the unit via a F.G cable.
6