Replacement Parts Information - Mendota D30 Installation And Operating Instructions Manual

6.8 REPLACEMENT PARTS INFORMATION

How to Access Components
The descriptions below show where the main fireplace inserts components are located and how to access them for service. The
descriptions show how to access the components after the fireplace insert has been installed.
Pilot: The pilot light is located on the left side inside the firebox.
Gas Valve: The main gas valve is located behind the lower grill and beneath the firebox.
Complete Valve Assembly: To make working on components easier, this fireplace insert has been designed with the valve, pilot,
shutter boxes, shutter cables and gas lines as part of one assembly that can be removed from the fireplace insert. To remove the
assembly first remove burners and burner airbox. After disconnecting the gas line and wires, below the firebox, remove hex nuts
that secure the valve mounting plate to firebox floor. Lift up and remove the entire assembly from the firebox.
Convection Blowers: The convection blowers are mounted in the space below the firebox, behind the gas valve. To access the
convection blowers, remove the Valve Assembly first.
General Replacement Parts List
PART NO
HA-27-00073 DOOR GASKET
65-06-00449 GLASS, D30
DOOR FRAME ASSEMBLY, D30
HA-28-00040
35-01-00240 COALS 12 OZ BAG
GLOWING INSWOOL
35-01-00239
35-01-00296 LOG SET, D30
SIT VALVE NAT. GAS
05-02-00306
05-07-00067 THERMOCOUPLE
05-07-00061 THERMOPILE
10-01-00046 BLOWER RHEOSTAT
05-07-00084 LPG Heavy Duty Thermocouple
85-03-01071
DESCRIPTION
D30 DEEP TIMBER
PART NO
05-04-00035 PILOT ASSEMBLY. NAT. GAS
HA-28-00194 LP KIT
65-14-00052 ORIFICE (LPG) #52
10-10-00104 ON/OFF SWITCH
65-14-00035 ORIFICE (NAT. GAS) 35"
65-06-00149 PIEZO IGNITER
15-02-00120 R H BLOWER WITH MOTOR
15-02-00121 L H BLOWER WITH MOTOR
65-06-01049 BLACK PAINT - 12 OZ. SPRAY CAN
65-06-00455 KEL-KEM GLASS CLEANER/POLISH
DESCRIPTION
Page 73