Mendota D30 Installation And Operating Instructions Manual page 61

6. Log #F sits on the right side, as shown above.
❑ Place coals on front coal tray ONLY! Be sure to "fill" entire front tray with coals for true "realistic" wood log fire
appearance. Coals must not block pilot or burner flame! (Additional coals may be scattered on firebox floor for
realism). Placement of coals has a big effect on front burner flame appearance and "glow" of coals.
❑ More coals = less flame and more glow. Fewer coals = more flame, less "glow".
❑ Cycle on main burner to insure the flame runs smoothly around the curved section of the burner and lights front
burner with no delays. If there are any delays in ignition or flame movement it will be necessary to check for correct
positioning of logs and coals (coals or logs must not block pilot flame or burner flame) and to check pilot flame length.
❑
Check that the flame is "stable" and not "lifting" off burner. DO NOT proceed with operation unless entire burner
lights immediately and flame is not "lifting" off burner.
❑ Reinstall glass.
❑ You can now proceed with normal daily operation. In daily operation main burner should always be lit with Insert glass
in place.
85-03-01071 D30 DEEP TIMBER Page 61