Communication Settings - Paradox Digiplex DGP-848 Programming Manual

Section #
[550]
___
Section # Hexa Value (0-FFFF)
If less than 4 digits, press [
[551] ___/___/___/___
[552] ___/___/___/___
[553] ___/___/___/___
[554] ___/___/___/___
Only SIA formats support the "0" digit in its account numbers. For account numbers that use another reporting format,
you must replace the "0" with an "A". To enter an "A", press the [
keypads. When using the SIA Format, the control panel will only use Partition Account Number 1 programmed in section
[551], but the report code will include the partition number.
[555] ___/___/___/___
[556] ___/___/___/___
[560] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
PC TELEPHONE NUMBER FOR
[561] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
MONITORING STATION
[562] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
MONITORING STATION
[563] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
MONITORING STATION
[564] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
MONITORING STATION
For North American installations using either SIA or Contact ID reporting formats, enter *70 and then either P (4-second
pause) or W (wait for second dial tone) before the phone number in sections [560] to [564] to disable call-waiting
Function
*
#
Switch to Tone Dialing (T)
Wait for second dial tone (W)
4-second pause (P)

Communication Settings

___ ___ ___
]
ENTER
W L
IN OAD
/
PAGER TELEPHONE NUMBER
/
PAGER TELEPHONE NUMBER
/
PAGER TELEPHONE NUMBER
/
PAGER TELEPHONE NUMBER
Table 2: Special Telephone Number Keys
LCD Grafica
[ ]
STAY
[#]
[ ]
FORCE
(press key until desired
[ ]
ARM
letter/symbol appears)
[ ]
DISARM
[ ]
BYP
Digiplex DGP-848
Description
REPORTING FORMATS FOR TELEPHONE NUMBERS
USE THE SAME FORMAT FOR EACH NUMBER
ONLY THE PAGER FORMAT CAN BE USED
WITH OTHER REPORTING FORMATS
For more information refer to Automatic
Report Code Programming on page 35.
Description
PARTITION
PARTITION
PARTITION
PARTITION
] key on LCD keypads or the [#] key on Grafica
STAY
PANEL IDENTIFIER
PC PASSWORD
S (press [
OFTWARE ENTER
1 (press [
ENTER
2 (press [
ENTER
3 (press [
ENTER
4 (press [
ENTER
Function
Clear
Delete
Delete from cursor to the end
Insert space
- 30 - Programming Guide
1:
ACCOUNT NUMBER
2:
ACCOUNT NUMBER
3:
ACCOUNT NUMBER
4:
ACCOUNT NUMBER
( W L
FOR IN OAD
( W L S
FOR IN OAD OFTWARE
] if less than 32 digits)
] if less than 32 digits)
] if less than 32 digits)
] if less than 32 digits)
] if less than 32 digits)
LCD
[ ]
CLEAR
[ ]
TRBL
[ ]
ACC
[ ]
MEM
1 4
TO
.
.
S )
OFTWARE
)
.
Grafica
Left action key (Clear)
—
—
—