Paradox Digiplex DGP-848 Programming Manual page 35

System Trouble Report Codes
[706]: __ /__ N/A
__ /__ AC Failure
__ /__ Battery Failure
(disconnect or low)
__ /__ Auxiliary Supply
[707]: __ /__ Bell Output (disconnect
or overload)
__ /__ Timer Loss
__ /__ Fire Loop Trbl.
__ /__ N/A
System Trouble Restore Report Codes
[712]: __ /__ TLM restore
__ /__ AC restore
__ /__ Battery failure restore
(disconnect or low)
__ /__ Aux. supply restore
[713]: __ /__ Bell output (disconnect
or overload) restore
__ /__ Timer programmed
__ /__ Fire loop restore
__ /__ N/A
Special Report Codes
[717]: __ /__ Cold start (sys. shutdown)
__ /__ Warm start (sys. reset)
__ /__ Test report
__ /__ N/A
Automatic Report Code Programming
When using Contact ID or SIA Reporting formats (section [550] page 30), default report codes can be programmed
automatically. After automatic defaults are set, they can be changed and the remaining report codes can be set manually.
Section #
[790]
ALL CODES
[791] &
ARMING
[792] &
ALARM ALARM RESTORE CODES
[793] &
TAMPER
[794] T & T
ROUBLE
[795] S C
PECIAL
[708]: __ /__ Combus Fault
[709]: __ /__ Module fail to com.
[714]: __ /__ Combus fault restore
[715]: __ /__ N/A
[718]: __ /__ N/A
DISARMING CODES
TAMPER RESTORE CODES
R C
ROUBLE ESTORE ODES
ODES
Digiplex DGP-848
__ /__ Module tamper
__ /__ Module ROM check
error
__ /__ Module TLM Fail
__ /__ Printer fault
__ /__ Module AC failure
__ /__ Module battery failure
__ /__ Module tamper restore
__ /__ Module ROM check
error restore
__ /__ Module TLM restore
__ /__ Printer fault restore
__ /__ Module AC restore
__ /__ Module battery restore
__ /__ PC access finished
__ /__ Installer in
__ /__ Installer out
Description
Sets all the report codes in the following sections to the
default values from the "Automatic Report Codes List":
[600] to [718]
[600] to [654]
[655] to [680]
[681] to [705]
[706] to [716]
[717] to [718]
- 35 - Programming Guide
[710]: __ /__ Module auxiliary failure
__ /__ Low battery wireless tx.
__ /__ Wireless transmitter
supervision trouble
__ /__ N/A
[711]: __ /__ Tel# 1 fail to com.
__ /__ Tel# 2 fail to com.
__ /__ Tel# 3 fail to com.
__ /__ Tel# 4 fail to com.
[716]: __ /__ Module aux. restore
__ /__ Wireless transmitter
battery restore
__ /__ Wireless transmitter
supervision restore
__ /__ N/A