Dialer Options - Paradox Digiplex DGP-848 Programming Manual

Bold = Default setting
[521]
Section

: Dialer Options

Option
Telephone Line Monitoring (TLM) Options
[1] [2]
Disabled (default)
OFF OFF
[1]&[2]
When armed:
OFF ON
When armed:
ON OFF
TLM silent alarm:
ON ON
[3] Dialer (reporting to monitoring station)
[4] Dialing Method
[5] Pulse Ratio
[6] Busy Tone Detection
[7] Switch to pulse dialing on 5th attempt
Bell/Siren upon Communication Failure if
[8]
system is armed
[522]
Section : Dialer Options
Option
[1] Call Back
[2] Automatic Event Buffer Transmission
[3] Hourly Test Transmission
[4] Shabbat Feature
[5] Clear Bell Limit Trouble*
[6] Alternate Dial
[7] Dial Tone Delay
[8] Report zone restore options
* For UL installations, option [5] must be set to ON.
Dialer Options
GENERATES AUDIBLE ALARM
GENERATES TROUBLE ONLY
BECOMES AUDIBLE ALARM
Digiplex DGP-848
OFF
see table
see table
Disabled
Pulse
1:2 (Europe)
Disabled
Disabled
Disabled
OFF
Disabled
Disabled
Disabled
Disabled
On Restore
Disabled
Force dial if no dial tone
On bell cut-off
- 24 - Programming Guide
ON
see table
see table
Enabled
Tone (DTMF)
1:1.5 (North America)
Enabled
Enabled
Enabled
ON
Enabled
Enabled
Enabled
Enabled
Manually
Enabled
Hang-up if no dial tone
On zone closure