Other Settings And Modes - Paradox Digiplex DGP-848 Programming Manual

Section # Data
[800] ___/___/___/___/___/___
[801] to [896]
The instructions that follow detail how to program access codes when using an LCD keypad. For instructions
on how to program users when using a Grafica keypad, refer to Grafica's User Manual. A complete Grafica
user manual is available on our website at www.paradox.ca. Program User Code Options, Partition
Assignment and Access Control features for users 001 to 096. Refer to the appropriate keypad User's Manual
for instructions on how certain users can also program these values.
To program user labels, refer to the LCD Keypad System Manager's Manual.
Press and hold
Installer Code
User Code Options
Feature Select
Programming
Press the [ ] key
User Partition
Assignment
Feature Select
Programming
Press the [ ] key
Access Level and
Schedule Assignment
Enter digits
Access Control User
Feature Select
Programming
Press the [ ] key
Access Card
Press the [
save and advance to next section

Other Settings and Modes

the [0] key
Enter the
Enter the
[ ]
SECTION
Set desired
options
Set desired
options
Set desired
Options
options
Enter
] or [ ] key to
ENTER
Digiplex DGP-848
Description
INSTALLER CODE
Where sections [801] to [896]
represent User #s 01 to 96.
User Code Options (Bold = default setting)
[1] [2] Feature
off Master Feature Disabled
on off User can program user access codes
on on User can program user access codes, options & assignment
[3] Duress [6] Stay & Instant
[4] Bypass [7] Force
[5] Arm only [8] off = access keypad's partitions only
on = access any partition assigned to user
*Note: all users can regular arm the system
User Code Partition Assignment †
[1] User Code Has Access to Partition 1
[2] User Code Has Access to Partition 2
[3] User Code Has Access to Partition 3
[4] User Code Has Access to Partition 4
† The default setting depends on the programming user's assigned partitions. For
example, when a user (with master feature) that is assigned to partitions 1 and 2
programs a user code, partitions 1 and 2 will be the default setting for the new user.
Access Level and Schedule Assignment
First brackets
Access Level = enter level from 00 (default) to 15 (00 = access to all doors)
Second brackets
Schedule = enter level from 00 (default) to 15 (00 = access granted at all times)
Access Control User Options (default: all options Off)
[1] Access Card is activated
[2] Can disarm with Access Card
[3] Access Card with Extended Unlocked Period
[4] [5] [6] [7]
on off off off
on on off off
on off on off
on off off on
[8] Can open armed Access Control Doors
Access Card Assignment
Enter Access Card's serial number or present Card to the reader
- 39 - Programming Guide
Feature
Can Regular Arm with Access Card
Can Stay Arm with Access Card
Can Instant Arm with Access Card
Can Force Arm with Access Card
Default
000000