Preparing For Operation - OM POWER OM2000A+ Instruction Manual

5.3.

Preparing for operation

In STBY the amplifier is in bypass-mode and your transceiver is directly connected to
the antenna. Maximum allowed power in bypass mode is 200 Watts! Passing RF power
is displayed if PA is in standby mode.
To turn PA ON press ON/OFF button on the front panel (black one) and hold it abt. 1 second. PA will
start tube heating. It will take 180 seconds. Turning PA ON is possible ONLY from the home screen! If
you have other display active, press EXIT more times to go back to the home screen.
Last settings allows to see INFO. All of
Type of supported TCVR and
previous information screen will be visible
plus one more for upgrade.
frequency are visible on the
AUTO LED is ON.
UPGRADE touch button can be used
ONLY in the case if EEPROM or firmware
Type of supported TCVR and
files (or both) will be upgraded. In such a
case ask dealer or manufacturer for the
exact procedure.
frequency are visible on the
AUTO LED is ON.
working
display.
working
display.
21