OM POWER OM2000A+ Instruction Manual page 27

PA will automatically set 20mA of EBS.
Type of supported TCVR and
You can try to do this manually, too.
frequency are visible on the
Scroll to SET EBS1 MANUAL and press
SET.
AUTO LED is ON.
Use left/right button to set 20mA or as
Type of supported TCVR and
close as possible value and press SAVE.
frequency are visible on the
Similar ways EBS2
preprogrammed (250mA).
AUTO LED is ON.
Scroll to CALIBRATION Ip, Is and press
Type of supported TCVR and
SET. Calibration
automatically.
frequency are visible on the
Go to the bottom line.
AUTO LED is ON.
working
display.
working
display.
can be
will be done
working
display.
27