Step 3- V.24 Connection - Futurecom PDR8000 Deployment Manual

Document 8K088X03 R3.0
PDR8000 Portable Digital Repeater Deployment Guide

Step 3- V.24 Connection

To access the V.24 end connector, unscrew the dust cover (refer to Figure 10). The V.24 cable
(supplied by end user- see Appendix A - V.24 Cable) is connected from the V.24 end connector
of the PDR8000 to the V.24 system device: DIU (supplied by end user), Modem (supplied by
end user), Conventional Channel Gateway (supplied by end user- available as model number
SQM01SUM0205 from Motorola Solutions) or another PDR8000.
NOTES:
1
The V.24 end connector on the PDR8000 is weatherproof . To ensure connection remains
weatherproof, an IP 65 compliant end connector (ie CONEC 17-103274) should be used with
the V.24 cable.
PDR8000 has been tested with DIU3000 and a few Modems including Motorola UDS V.335 and
Codex 3260 Fast Data Modem.
1
Water will not get through the RJ-45 connectors when a generic Ethernet cable is plugged into these PDR connectors.
However, water will get onto connector contacts and into the connector.
One of the attached Ethernet cables should be used to assure waterproof connection when a cable is plugged in.
Page 12 of 24