Initial Power-Up - Advantech RMD-1150F-8 User Manual

Initial Power-Up

Make sure all computers and RMD-1150 are powered down during installation. You
must power up the RMD-1150 before turning on any other devices.
4 For single RMD-1150 :
1) Apply a power adapter to the RMD-1150 .
2) Turn on computers.
4 For cascade:
1) Apply a power adapter to the RMD-1150 .
2) Apply power adapters to all Slaves.
3) Turn on computers.
Note: You may hot plug additional powered-down computer and Slave without turning existing
RMD-1150 or computer off after initial power up.
Replace RMD-1150 External Console Devices
You can replace a faulty external keyboard or mouse of the RMD-1150 CONSOLE port at
any time without powering down the RMD-1150 , as long as your computers are booted with
proper device driver for the new device.
9