Control Functions - Advantech RMD-1150F-8 User Manual

listen to a particular computer's audio signal while operating other computers.
left Ctrl + left Ctrl + F5
The RMD-1150F-8 generates 1 or 2 beeps corresponding to On and Off respectively.
OSD (On-Screen-Display) Operation For LCD Monitor

Control Functions

The monitor control functions are located on the bottom side of the panel. They are
shown in the figure below and described in the following paragraphs.
Key Definition
1. MENU
Use the key to select the desired adjustment item .
2. ADJUST
Use the key to change the value for optimal viewing
3. POWER SWITCH
Use the power switch to turn ON or OFF power. We recommend turning your
system power on first, then the LCD monitor.
4. POWER STAND-BY MODE LED
Show LCD system in the power stand-by model.
5. Power on LED
Show LCD system in the power on model.
The control key description
1. MENU :Press any key to MENU
2. :Move to the next item
3. :Move to the previous item
4. : Increment control
5. :Decrement control
6. :Power Switch
7. SIMULTANEOUSLY: Hot key to change input channel
8. SIMULTANEOUSLY: Hot Key for Auto Adjusting
:
:
:
15