Table of Contents
Advertisement
Overview
Two-Console 15.0" TFT LCD display Switch
The advanced multi -access RMD-1150 Switch enable you to control multiple computers
from two different locations, remote and local with two keyboards, mice and monitors. There
is no interface card or software to configure. Installation is as easy as connecting cables
between the RMD-1150 and your computers. Operation is as simple as entering hot-key
command and navigating through the user-friendly on-screen menu. RMD-1150F-8 switches
8 IBM-compatible computers and up to 64 IBM-compatible computers by cascaded. The
RMD-1150 is independent of the computer operating system.
On-Screen Display (OSD) Menu
For RMD-1150
with built-in OSD control, you can name your computers, switch to a
computer from a list, configure settings with easy-to-use menus, view the name of the
selected computer on-screen with programmable time interval.
The OSD displays the
system status throughout operation.
Automatic Mouse Conversion
The RMD-1150 allow you to connect computers with PS/2 or serial mouse ports (using
adapters supplied with each RMD-1150 ) and control the computers from internal mouse pad
or one PS/2 mouse. The RMD-1150 automatically identifies the mouse and switches to
proper mouse protocol.
High Video Quality
RMD-1150 offers two console to display and control the computer that you connected.
External console supports VGA resolution up to 1600x1200 @85Hz without any degradation
and build-in console supply 15.0" LCD display by 1024x768 @75Hz. Advanced VGA circuit
design guarantees smooth and flicker-free switching from one computer to the other with
distance up to 100ft (30M)* at both Console and PC sides.
* Tested with high-quality UL2919-rated, low-loss and shielded cables.
4
Advertisement
Table of Contents
