Table of Contents
Advertisement
O p e r a t i o n
- - - - - - - - - - - - - - - - - - - - - - - -
OSD (On-Screen-Display) Operation For RMD-1150 Switch
Figure 5: RMD-1150 portion OSD screen illustration
By hitting the left <CTRL> key twice within two seconds, you may see the 'Hotkey Menu' if it
is enabled (an OSD option). Or, by hitting the left <CTRL > key three times within two
seconds, you will see a 'KVM MENU' screen showing a list of the computers with
corresponding channel addresses, names and status, see figure 5.
The channel address of the currently selected computer is displayed in red to the right of the
OSD title 'KVM MENU'. The color of a device name is green if it has power and is ready for
selection, or the color is white as it has no power. OSD menu updates the color when it is
activated.
Use the <UP> and <DOWN> arrow keys to highlight a computer and the
<ENTER> key to select it. Or, you may press <ESCAPE> to exit OSD and remove the OSD
menu from the display; the status window returns to the display and indicates the currently
selected computer or operating status.
A triangle mark (4) to the right of a name indicates the port is cascaded to a Slave; the
number at the left of the triangle mark shows the number of ports the Slave has, i.e. 84for
KNV108. <ENTER> key brings you one level down and another screen pops up listing the
names of the computers on that Slave. The name of the Slave will be shown at the upper
right corner of the OSD menu. It is useful to group computers and still be able to see the
group name.
An eye mark (N) to the right of a name indicating the computer is selected to be monitored in
10
Advertisement
Table of Contents
