Table of Contents
Advertisement
2.1.5
Power Adapter Bracket Mounting (Optional)
A metal bracket is offered as an optional accessory for FPM-717/719/715W.(P/N :
FPM-7000G-ADKE). This helps avoid hanging/loose power adapters.
This metal bracket can be mounted on the back of the monitor in 2 x simple steps:
1.
Place the metal bracket on top of the power adapter and position it against the
dedicated holes
2.
Secure the metal bracket with the included screws and metal bracket installation
is complete
This equipment must be installed and removed by a trained skilled person.
Recommendations for maximum cable distance and wires:
Single copper or multi-core copper wire, at 80 °C.
Wire range 12-24 AWG.
Wire strip length: 4-5 mm.
Screw torque 7.0 lb-inch.
FPM-700/700W Series User Manual
Figure 2.5 Power Adapter Bracket Mounting
12
Advertisement
Table of Contents
