Table of Contents
Advertisement
6.2.2 What Else You Will Need
Besides what is supplied with the RCM5400W Development Kit, you will need a PC with
an available USB port to program the RCM5400W module. You will need either an access
point for an existing Wi-Fi network that you are allowed to access and have a PC or note-
book connected to that network (infrastructure mode), or you will need at least a PDA or
PC with Wi-Fi to use the ad-hoc mode.
User's Manual
59
Advertisement
Table of Contents
Need help?
Do you have a question about the RabbitCore RCM5400W and is the answer not in the manual?
Questions and answers