Industry Canada Labeling - Rabbit RabbitCore RCM5400W User Manual

Labeling Requirements (FCC 15.19)
FCC ID: VCB-E59C4472
This device complies with Part 15 of FCC rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
If the FCC identification number is not visible when the module is installed inside another
device, then the outside of the device into which the module is installed must also display
a label referring to the enclosed module or the device must be capable of displaying the
FCC identification number electronically. This exterior label can use wording such as the
following: "Contains Transmitter Module FCC ID: VCB-E59C4472" or "Contains FCC
ID: VCB-E59C4472." Any similar wording that expresses the same meaning may be used.
The following caption must be included with documentation for any device incorporating
the RCM5400W RabbitCore module.
Caution — Exposure to Radio-Frequency Radiation.
To comply with FCC RF exposure compliance requirements, for mobile
configurations, a separation distance of at least 20 cm must be maintained
between the antenna of this device and all persons.
This device must not be co-located or operating in conjunction with any
other antenna or transmitter.

1.4.2 Industry Canada Labeling

This Class B digital apparatus complies with Canadian standard
ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
OEM User's Manual
7143A-E59C4472
7