Rabbit RabbitCore RCM5400W User Manual page 110

Table B-4. RCM5400W Prototyping Board Jumper Configurations (continued)
Header Description
LN5 buffer/filter to
JP20
RCM5400W
LN6 buffer/filter to
JP21
RCM5400W
LN7 buffer/filter to
JP22
RCM5400W
JP23 LN4_IN–LN6_IN
JP24 LN0_IN–LN3_IN
JP25 Thermistor Location
NOTE: Jumper connections JP3–JP10, JP12, JP14, JP16, JP18, JP23, and JP24 are made
using 0 Ω surface-mounted resistors. Jumper connections JP11, JP13, JP15, JP17, and
JP19–JP22 are made using 470 Ω surface-mounted resistors.
104
Pins Connected
1–2
1–2
1–2
1–2 Tied to analog ground
2–3 Tied to VREF
1–2 Tied to analog ground
2–3 Tied to VREF
1–2
Factory
Default
Connected
Connected
Connected
×
×
n.c.
RabbitCore RCM5400W