Curves Start Write Curves From Ram To Flash; Ads Command Table Services; Command Table Delete All Entries From Ram - LinMot C1250-EC-XC-0S Interface Manual

4.3.13 Curves start write curves from RAM to FLASH

Save the whole curve section from RAM to FLASH memory.
FUNCTION_BLOCK ADSWRITE
Direction Name
Input NETID
Input PORT
Input IDXGRP
Input IDXOFFS
Input LEN
Input SRCADDR
Input WRITE
Input TMOUT
Output BUSY
Output ERR
Output ERRID
4.4

ADS Command Table Services

4.4.1

Command Table delete all entries from RAM

Delete all command table entries in RAM.
FUNCTION_BLOCK ADSWRITE
Direction Name
Input NETID
Input PORT
Input IDXGRP
Input IDXOFFS
Input LEN
Input SRCADDR
Input WRITE
Input TMOUT
Output BUSY
Output ERR
Output ERRID
32 / 60
Type Description
T_AmsNetId AoE NetID
T_AmsPort ADS Port
UDINT 005Fh (LinMot Service ID)
UDINT -
UDINT Always 0 bytes
DWORD ADR(write_buffer (0bytes))
BOOL Rising edge starts reading
TIME Timeout value
BOOL Indicates reading active/finished
BOOL Indicates reading error
UDINT Error ID
Type Description
T_AmsNetId AoE NetID
T_AmsPort ADS Port
UDINT 0060h (LinMot Service ID)
UDINT Not evaluated
UDINT Always 0 bytes
DWORD ADR(write_buffer (0bytes))
BOOL Rising edge starts reading
TIME Timeout value
BOOL Indicates reading active/finished
BOOL Indicates reading error
UDINT Error ID
NTI AG / LinMot