Image Forming System; Removing The Transfer Roller - Canon D1300 Series Service Manual

4
Disassembly/Assembly > Image Forming System > Removing the Transfer Roller

Image Forming System

Removing the Transfer Roller

1) Open the Front Cover.
2) Pinch the Holder [1] and Remove It In the Direction Of the Arrow.
[1]
3) Remove the Transfer Roller [1] In the Direction Of the Arrow.
[1]
4 Disassembly/Assembly > Image Forming System > Removing the Transfer Roller
CAUTION :
At Installation, Make Sure to Hold the Shaft [1] of the Transfer Roller and be Careful Not
to Touch the Sponge Part [2] of the Roller.
F-4-146
F-4-147
[1] [2]
4-59
[1]
F-4-148
4-59