Canon D1300 Series Service Manual page 116

4
Disassembly/Assembly > Pickup / Feed System > Removing the Duplex Feed Unit
3) Remove the Rear Cover Unit [1] from the Duplex Feed Unit [2].
• 2 Bosses [3]
[2]
[3]
4 Disassembly/Assembly > Pickup / Feed System > Removing the Duplex Feed Unit
[1]
[3]
F-4-161
CAUTION :
Procedure at installation
1) Fit the 2 Upper Claw [2] of the Rear Cover Unit [1] With the Upper Cover.
2) Open the Sub Output Tray [3] and While Pushing the Duplex Reverse Sensor Flag [4]
Downward, Install the Rear Cover Unit.
3) Check That the Sensor Flag [4] Protrudes Through the Hole [5] of the Guide Unit On
the Back of the Duplex Unit Cover.
[4]
[4]
[5]
4-64
[2] [1]
[3]
F-4-162
4-64