Canon D1300 Series Service Manual page 102

4
Disassembly/Assembly > Controller System > Removing the Control Panel
3) Release the Connection of Arm [1] and turn it toward the rear.
[1]
4) Remove the 2 Blanking Sheets [1] and 4 Screws [2] On the Bottom Of the Reader Unit.
CAUTION:
Since the Blanking Sheet [1] Needs to be Purchased Separately, be Careful Not to Lose
it After Removing It.
x4
[2]
4 Disassembly/Assembly > Controller System > Removing the Control Panel
F-4-123
[2]
[1]
F-4-124
5) Remove the Control Panel [1].
• 9 Claws [2]
• 1 Flat Cable [3]
• 1 Terminal [4]
x2
x9
[1]
4-50
[2]
[2]
[4]
[3]
[2]
F-4-125
4-50