Original Detection - Canon D1300 Series Service Manual

Table of Contents

Advertisement

2
Technical Overview > Document Exposure / Delivery System > Document Feeder System > Original Detection

■ Original Detection

There are two types of Original Detection in this Equipment.
1. Original Presence / Absence Detection
Detected by DS (Document Sensor: PS703)
Setting the original onto the original tray pushes up the actuator, activating (light shielded
=>light transmitted) the DS (PS703), and resulting in detection of the
presence of original.
2. Detection of the End of the Original
Detected by the DES (Document End Sensor: PS702)
The leading edge of the original that is fed pushes up the actuator, activating the DES (PS702)
(light shielded =>light transmitted) and resulting in detection of the reach of the leading edge
of original. Furthermore, when the trailing edge of the original passes the actuator position,
the actuator returns to the original position, inactivating the DES (PS702) (light transmitted =>
light shielded). The trailing edge of the original is detected by this mechanism. The original
length that can be scanned with this equipment is less than 400 mm. Passing of the original
longer than this results in jam stop. The original length is calculated by the time it takes from
detection of the leading edge of the original to detection of the trailing edge of the original..
NOTE:
There is no function to detect the original size (original width, length) in this equipment.
2
Technical Overview > Document Exposure / Delivery System > Document Feeder System > Original Detection
PS703
PS702
J910
12
11
10
9
8
7
MCON
2-7
F-2-7
2-7

Advertisement

Table of Contents
loading

Table of Contents