Memory - Route Measurement - Adash A4900 Vibrio M Pocket Manual

Memory - Route measurement

(*available for the Vibrio M only)
1. Data transfer
2. Route
3. Machine selection
4. Machine confirmation
12
Firstly the route must be
loaded to the device from the
DDS software
Go to MENU/MEMORY/ROUTE
(see page 7)
View readings
Delete all readings
Delete all readings and route
structure
Use the Arrow buttons to switch
between the machines in route
Press the Enter button [SEL]
to confirm the selection
[BCK] go back to [ESC] from the
Machine selection route
Press the Enter button [ACK]
to confirm the selection
5. Point selection
6. Point confirmation
[BCK] go back to
7. Taking the measurement
8. Saving the measurement
[DEL] delete the
measurement
Use the Arrow buttons to switch
between the points in route
Press the Enter button [SEL]
to confirm the selection
[UP] go back to
Machine selection
Point selection
Press the Enter button
[MEAS] to start measuring
i
If the temperature is defined in the route,
this measurement is taken first
Measurement progress can
be seen on the screen
[+>] save and move
to the next point
[ACK] save the
measurement
13