Proximity Measurements - Adash A4900 Vibrio M Pocket Manual

Proximity option
(*available for the Vibrio MP only)
16
i
The A4900 Vibrio MP needs to be
connected to a proximity sensor for
proximity measurement!
(The default sensor sensitivity is set to
7.87 mV/μm, 200 mV/mil)
When the device is switched on,
select Prox for proximity option
Select Metric or Imperial units
Press the Enter button for the Menu
Off route data can be saved to
the memory (the route cannot
be performed with the proximity
measurements)

Proximity measurements

(*available for the Vibrio MP only)
Speed
DC part of signal
Spectrum 1 kHz or 2.5 kHz
Time signal 1 - 1 000 Hz
i
Use the arrow keys to move between
the measurement screens
Speed can be detected automatically
or set manually
Displacement 1 - 1 000 Hz
Spectrum 200 Hz
17