RUGGEDCOM RMC41
Installation Guide
Power Supply Terminal
Communication Ports
Section 1.3
Required Tools and Materials
The following tools and materials are required to install the RUGGEDCOM RMC41:
AC or DC power cord (16 AWG)
CAT-5 Ethernet cables
Flathead screwdriver
Phillips screwdriver
4 x #8-32 screws
Section 1.4
Supported Fiber Optic Cables
The following fiber optic cable types are supported under the stated conditions.
Cable Type
OM1 (62.5/125)
OM2 (50/125)
a
OM3 (50/125)
a
OM4 (50/125)
a
Laser optimized.
Required Tools and Materials
State
Yellow (Blinking)
A pluggable terminal. For more information, refer to:
•
Section 2.4, "Connecting Power"
•
Section 4.1, "Power Supply Specifications"
Receive and transmit data. For more information about the various ports available for the
RUGGEDCOM RMC41, refer to
Tools/Materials
Modal Bandwidth
Wavelength (nm)
(MHz·km)
850
1300
850
1300
850
1300
850
1300
Description
Port activity
Chapter 3, Communication
For connecting power to the device.
For connecting the device to the network.
For mounting the device to a DIN rail.
For mounting the device to a panel.
For mounting the device to a panel.
100Base-FX
200
—
500
2000
500
—
500
2000
1500
—
500
2000
3500
—
500
2000
Introduction
Ports.
Purpose
Distance (m)
1000Base-SX
10GBase-SR
275
33
—
—
550
82
—
—
550
300
—
—
550
400
—
—
Chapter 1
3