Getting Started; Unpacking The Receiver; List Of Contents; Safety Precautions - Pico Digital XDS-PRO SERIES User Manual

Table of Contents

Advertisement

XDS-PRO Satellite Receivers

2 GETTING STARTED

Please take a few minutes to read through the User's Guide prior to setting up and using the unit. If you
are in a hurry, there is a Quick Start guide that comes packaged with the receiver, but please be sure to
consult this section at your earliest convenience.
2.1

Unpacking the Receiver

Upon receiving your XDS-PRO receiver, ensure that all of the necessary parts have been included.

2.1.1 List of Contents

Below is a table that lists the contents that are packaged with any model of XDS-PRO receiver.
2.2

Safety Precautions

2.2.1 Excessive Temperature

The XDS-PRO receivers have been designed to operate safely and reliably in an ambient temperature of
0
°
to 50° C. The system is expected to operate without the need for a fan in air conditioned locations.
The fan will be electronically controlled via temperature sensor. This will allow the unit to operate under
less than optimal conditions. However, once the receiver is located in a closed or rack environment, the
ambient temperature may be greater than room temperature. Please take this into consideration when
installing the receiver, making sure that the ambient temperature around the receiver does not exceed
the temperature range 0° to 50° C.

2.2.2 Proper Ventilation

Air vents on the side and rear of the receiver are provided to ensure proper air flow through the receiver
unit. In order to ensure proper operation, the XDS-PRO receivers should be located such that its
ventilation is not impeded. In a rack environment, at least two inches on the sides and at least 5 inches
in the rear should be provided. Proper ventilation will help ensure the receiver performs both safely and
efficiently.
8
www.picodigital.com
Quick Start Guide
Installation Kit (Optional)
Network Data Sheet
Table 1 - XDS-PRO Package Contents
The following sections provide a list of general hazards to be
avoided for safe, reliable use of the PRO receivers.
For the complete French translation of this section, please refer
Caution!
to the Safety Precautions – French addendum.
Item
Receiver
Power Cord
Quantity
1
1
1
1
1
R830001-2001, REV. C
TOLL FREE
800.421.6511

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xds-pro1qXds-pro4qXds-pro4rXds-pro1r

Table of Contents