Pico Digital XDS-PRO SERIES User Manual page 52

XDS-PRO Satellite Receivers
Option
SHOW
ALL
IN
TEST
MODE
* - [0-31] only valid for PRO4Q and PRO4R. Must use [0-15] for PRO1Q and PRO1R.
SHUTDOWN Command: Fully shuts down the receiver.
SLEEP Command: Delay or pause a command (used for M&C scripting). Syntax: SLEEP [msec].
STATIONS Command: Can also use STATION, this command is used for station management.
Option
SHOW
SCHED
ROTATIONS
ROTATIONS,ADD
TRACE Command: Used for diagnostic checks of the serial ports. Table 21 shows all TRACE options.
52
www.picodigital.com
Argument
[0-31]*,[ON/OFF/PULSE]
[xxxx]
[1-15]
[START/STOP]
[NONE/RLY/CUES/ALL]
Table 19 - RLY Command
Argument
[stationed],[pgm#]
[LT],[stationed], [pgm#], [cue-
code], [[isci]...[isci]]
Table 20 - STATIONS Command
Action
Fire, disable or pulse a relay on specified relay.
Show all relay mappings on the receiver.
Activate all relays.
Activate individual relay.
Start or stop a relay test that will send a pulse to all
relays.
Enable sources of relays: RLY=PrimaCue only,
CUE=NetCues only, ALL=Both, PORT = mapped
Display stations that are currently
mapped on the ports.
Display station schedule
Display all scheduled spots (insertions)
Action
TOLL FREE
R830001-2001, REV. C
800.421.6511