Table of Contents
Advertisement
XDS-PRO Satellite Receivers
5 AFFILIATE WEB INTERFACE
Your XDS-PRO receivers must always be connected to the internet to allow configuration, activation,
setup, monitoring of signal quality, program schedules, audio content and accountability.
The XDS-PRO receivers are capable of communicating with and being configured by an internet-
accessible Network Management System (NMS). The NMS has an Affiliate Web Interface to allow radio
station users to modify receiver settings such as time zone, relay mappings, receiver port program
schedules and other features that help simplify the management of network programs. The following
sections will instruct you on how to accomplish these tasks.
5.1
Accessing and Logging In
The website hosting your affiliate web page is provided by your broadcaster. Please refer to the packaged
Quick Start Guide and Network Data Sheet for instructions on navigating to this site.
After the page has loaded, type the username, which is your receiver's serial number (available on the
back panel of your receiver and via the front panel display for receivers equipped with control front
panels) and password. Once your correct username and password are typed in, press login.
5.1.1 Obtaining login password for receivers that are equipped with front panels
Navigate to the 'Serial' submenu in the receiver's front panel display (see section 3.2.2 for more details).
5.1.2 Obtaining login password for receivers that are NOT equipped with front panels
First time visitors must connect to the M&C port of the receiver and execute the PASS command to
receive the Daily Password to login. It is highly recommended to set a Friendly Password as soon as
possible to avoid having to log in using the temporary Daily Password. Return visitors can use the
Friendly Password to log in once it is configured.
Figure 17 - Affiliate Website Login Page
31
R830001-2001, REV. C
www.picodigital.com
TOLL FREE
800.421.6511
Advertisement
Table of Contents
