Table of Contents
Advertisement
XDS-PRO Satellite Receivers
8.4
LBR Module (Optional) RF Input Parameters
The PRO1R and PRO4R receivers support an optional LBR module that can be installed to provide support
for low bit rate carriers. The LBR module can receiver both DVB-S and DVB-S2 modulated satellite
signals which will be received and demodulated by the XDS-PROR receiver.
receivers don't support the LBR module
module are provided in Table 41.
Connector
Frequency Input Range
Input Level
DVB-S Symbol rate
DVB-S2 QPSK Symbol rate
DVB-S2 8PSK Symbol rate
Modulation Scheme
Forward Error Correction modes
LNB Power
8.5
Mechanical and Electrical
The XDS-PRO receiver chassis specifications are provided in Table 42.
Dimensions
Mounting
Weight
Input Voltage
Power Consumption
65
www.picodigital.com
. Input signal and connector specifications for the LBR
75 ohm F-type Female
950 to 2150 MHz
-60 to -20 dBm
100 KSPS to 40 MSPS
1oo KSPS to 40 MSPS
1 to 40 MSPS
QPSK (DVB-S or DVB-S2), 8PSK (DVB-S2)
Reed-Solomon and Viterbi (DVB-S/MX3)
LDPC and BCH normal frames (DVB-S2)
18 VDC 500 mA MAX
Table 41 - LBR Module RF Input Parameters
3.5" High x 18" Wide x 12" Deep
19", 2RU
8 lbs.
100 – 240 VAC (50-60 Hz)
150 W max.
Table 42 - Mechanical and Electrical Specifications
The PRO4Q and PRO1Q
TOLL FREE
R830001-2001, REV. C
800.421.6511
Advertisement
Table of Contents
