Uncoded Opto Input Mode; Programming Opto Inputs - Pico Digital XDS-PRO SERIES User Manual

XDS-PRO Satellite Receivers
4.1.5.2

Uncoded Opto Input Mode

In this mode, the receiver is expecting that there will be a closure in one of the Opto input pins at a time
and each pin can be programmed to a different function (see Figure 10).
Figure 10 - Opto Inputs - Uncoded
4.1.5.3

Programming Opto Inputs

To program the Opto input triggers, press the EDIT button, enter a name that you would like to give the
particular function you are trying to program, select the enable checkbox if you want this function to be
enabled, enter one receiver command per line in the commands window, and press the SAVE button to
save your Opto function. You can use any receiver console command included in Section 6.2).
Figure 11 - Edit Opto Inputs
27
R830001-2001, REV. C
www.picodigital.com TOLL FREE 800.421.6511