Audio Ports: Setup Sub-Menus - Pico Digital XDS-PRO SERIES User Manual

XDS-PRO Satellite Receivers
3.3.4.1

AUDIO PORTS: SETUP Sub-Menus

Each of the five audio ports (Audio Port A-D, and Headphones) have their own identical setup sub menus.
From these menus, users may modify the station call number, the current program played on the audio
port, the current commercial spot played on the audio port, and a couple miscellaneous audio settings
not
(stereo or mono). These settings may only be changed if a red-cross symbol is visible on the port's
menu screen. If this symbol does appear, it means that this audio port is controlled automatically by the
broadcaster, and that the user is unable to change any of these settings.
When the Station menu is selected by pressing SET, the receiver navigates to a screen where call letters
can be selected in order by using ▲ and ▼ to choose a letter for the selected spot, ◄ and ► to choose
which position in the name is selected for editing, and SET to commit the changes to the station's call
letters. When Program or Spot menus are selected, the receiver will display a list of programs or spots
respectively. Use ▲ and ▼ to scroll through these lists, and use SET to select something from one of
these lists. When the Settings menu is selected, the user can change the audio ports output mode from
mono to stereo or vice versa. Again use the arrow keys and SET to accomplish this.
19
R830001-2001, REV. C
www.picodigital.com TOLL FREE 800.421.6511