Setup: Network Sub-Menus; Audio Ports Sub-Menus - Pico Digital XDS-PRO SERIES User Manual

XDS-PRO Satellite Receivers
 USB: Pressing the ▼ will navigate into the USB sub-menus.
 ALARMS: Allows you to set the alarm mask as a hex value.

VERSION: Pressing SET in this menu will display the receiver's firmware version.
 FACTORY DEFAULTS: Pressing SET will offer you the option of resetting the receiver's settings to
factory defaults. Press 1 to confirm or 3 to cancel. Reboot is required.
 REBOOT: Pressing SET will offer you the option of rebooting the receiver or gracefully shutting
down the receiver. Press 1 to reboot, 2 to shut down gracefully, 3 to cancel.
times from the top idle screen to automatically go to this screen).
 RELAYS: Allows you to switch any of the individual relay signals on Relay A or B to on. Press ▼ to
choose which Relay port to edit, then press SET to modify which pins on the relay are activated. A
'0' is an un-activated relay and a '1' is an activated relay. The first position is the Relay 1, the second
position is Relay 2, and so on.
 Test Tones: Supply test tones from the receiver.
 TUNER 1 & TUNER 2: Pressing the ▼ will navigate into the Tuner sub-menus.
3.3.3.1

SETUP: NETWORK Sub-Menus

Starting from the Main Menu and navigating to Setup option and pressing ▼, and then navigating to
Network option and pressing SET, a user will have access to the Network sub-menus. In these sub-
menus, the receiver's network settings can be made. The network menu options include:
 DHCP (on or off): Allows the user to specify a dynamic or static IP (on or off respectively).
 LAN IP Address: In the case of a static IP, this allows the user to specify the LAN IP address of the
receiver.
 LAN Subnet Mask: Allows the user to specify the LAN Subnet mask.
 WAN Address: Specify the WAN IP address.
 WAN Subnet Mask: Specify the WAN subnet mask.
 GATEWAY: Allows the user to specify the default gateway to direct traffic to.
 DNS: Allows the user to specify DNS servers the receiver will use.
 PROXY: Allows the user to specify a proxy server the receiver will go through.

TEST NOC: When SET is pressed, this menu offers the user two test options. Pressing 1 allows you
to ping the internet to ensure the network connection is functioning, and pressing 2 tests the
receiver's website to ensure it is functioning. Pressing 3 exits from the Test menu.
 SETUP NETWORK NAS: Setup a NAS connected to the network.
To modify any of these numeric values: use◄ or ► to select which part of the IP to change. Make a digit
larger using ▲ and to make a digit smaller using ▼. Press SET whenever you are done editing and want
to commit a setting.

3.3.4 AUDIO PORTS Sub-Menus

From the Audio Ports sub-menus, users can change the settings for each of the four ports as well as
headphones port (for PRO4Q or PRO1Q-FP models). To choose which of these five ports to modify scroll
between them using ◄ or ► until the desired port is selected. Once the desired port is selected, pressing 1
will take you to the Station sub-menu where call letters for a station may be selected. Pressing 2 will take
you to Programs sub-menu where a specific program may be chosen from a list using ▲ and ▼.
Pressing 3 will navigate to the Spots sub-menu where specific radio spots may be chosen from a list,
again using ▲ and ▼.
18
www.picodigital.com
(Hot tip: press 3 three
R830001-2001, REV. C
TOLL FREE 800.421.6511