Tuner Tab - Pico Digital XDS-PRO SERIES User Manual

XDS-PRO Satellite Receivers

4.1.2 Tuner Tab

The Tuner Tab presents the user with tuner related data (see Figure 5 - Tuner Settings), and includes:
 Currently active tuner.
 Enabled/disabled status.
 Tuned frequency.
 Tuner's symbol rate.
 FEC, Data rate, Framing mode, and Modulation mode.

Tuner locked or not locked status.
 The acquisition state of the tuner.
 E /N – The energy per bit to noise power spectral density ratio, it is a normalized signal-to-noise
b 0
ratio measure, also known as "SNR per bit" (see Section 3.3).
 AGC – A closed-loop feedback regulation mechanism, helps to equalize the average volume of
different signals due to varying signal strength.
 Fade count* of the tuner.
 Reed-Solomon error count*.

Current LNB offset.
 On / off status of the LNB.
*The fade count and Reed-Solomon errors can be reset by pressing the Clear Statistics button.
Tuner settings can be edited at any time by pressing the Edit Tuner Settings button.
22
www.picodigital.com
Figure 4 - General Status Tab - Part 3
R830001-2001, REV. C
TOLL FREE 800.421.6511