Pico Digital XDS-PRO SERIES User Manual page 53

XDS-PRO Satellite Receivers
Option
SHOW
ALL
NONE
TTY Command: Modem diagnostics command. See Table 22 for usage.
Option
TUNER Command: This command is used to view and modify all of the receiver's tuner settings. Typing
this command without any options will display a usage message. Type this command followed by one of
these options/argument combinations to view or modify tuner settings:
53
www.picodigital.com
Argument
Table 21 - TRACE Command
Argument
[port],[0-2]
[port],[2400/9600/19200]
Table 22 - TTY Command
Display all trace options. *=live traces
Turn on all traces
Turn off all traces
Open serial port (0=M&C, 1=NETCUE, 2=MODEM)
Set baud rate for specified port (8 data, no parity, 1 stop bit)
Action
Action
R830001-2001, REV. C
TOLL FREE 800.421.6511