Pico Digital XDS-PRO SERIES User Manual page 44

XDS-PRO Satellite Receivers
Option
STATUS
STOP
LIVE
PID
PLAY
AMODE
AUTOPLAY
AUTOPLAY
INSERT
[UN]LOCK
SYNC
[PAUSE/RESUME
/PREVIEW]
TONE
CRASH
CRASH
PING Command: This command will attempt to ping the IP address specified by the argument. The
syntax is: PING [a.b.c.d] where [a.b.c.d] is the IP to ping, and is a required argument.
QUIT Command: See LOGOUT command.
SF Command: This command displays the receiver's fault history, and does so in two distinct ways: by
fault code, or by text description (if the SHOW argument is added.) Syntax:
 SF will provide the fault history in fault codes (see Table 6 for descriptions)
44
www.picodigital.com
Argument
[port]
[port]
[port],[pgmid]
[port],[pid]
[port],[recording],[[ofs]]
[port],[MONO/STEREO]
[port],[pgmid],RECENT,[n]
[port],[pgmid],TIME,[HH:MM:SS],
[[YYYY-MM-DD]]
[port],[isci]
[port] where [port] equals
A,B,C,D or ALL
[port]
[100/1000/10000/STOP]
[pgm],[LOCK/UNLOCK]
0
Table 5 - PORT Command
Action
Displays Station, Mode, PGM, PID
mappings for all ports
Stop specified port from playing
Change port to play live program based on
program ID.
Change port to play PID. PID specified in
hex.
Set audio mode on specified port.
Lock or unlock specified port or all ports
Sync audio ports to regular schedules
Stops programming and puts tone on all
ports
Change to the requested program and
optionally lock the port
Unlock the requested port and sync to
regular schedule
R830001-2001, REV. C
TOLL FREE 800.421.6511