Specifications; Receiver Monitor & Control And Interface Specification; M&C Interface Features; M&C Interface Connector Pin-Outs - Pico Digital XDS-PRO SERIES User Manual

XDS-PRO Satellite Receivers

8 SPECIFICATIONS

The following specifications are divided into sections corresponding to the various functional blocks within
the receiver.
8.1
Receiver Monitor & Control and Interface Specification
8.1.1 M&C Interface Features
The Monitor and Control Features are provided in Section 6. The LCD, Keypad, and Headphone Jack are
options on the PRO1Q and standard on the PRO4Q, PRO1R, and PRO4R.
LCD
Keypad
USB Interface
Headphone Jack
Status LEDs
Monitor and Control Interface
Web Interface
8.1.2 M&C Interface Connector Pin-Outs
The Monitor and Control (M&C) port allows basic configuration of the XDS-PRO receiver via an
asynchronous RS-232C electrical interface. It uses the following protocol settings: 115.2K bits per second,
8 data bits, No Parity, 1 stop bits, and no hardware flow control. In addition to the asynchronous
interface, the M&C connector provides a status relay output and four optical inputs. The four optical
inputs are activated grounding the input signal. The following table provides the pin-out for the M&C
port.
Connector
Asynchronous Port
Relay Format
Optical Inputs
56
www.picodigital.com
Image display capability, backlighting
Full 8 key-pad, menu buttons, arrow keys, enter key
USB 2.0 port for attaching mass storage devices
Monitor audio output for any of the four ports
Power, signal, update, and fault indications
RS-232C compatible, DB-9 female
Automatically broadcast via LAN and WAN
Table 24 - Interface Features
DB-9 Female
115.2K bits per second, 8 data bits, no parity, no
hardware flow control
1 Form A
4 Input Signals, connect to ground to activate
Table 25 - M&C Port Specifications
R830001-2001, REV. C
TOLL FREE 800.421.6511