Table of Contents
Advertisement
XDS-PRO Satellite Receivers
If you are creating a new schedule and would like to play the network feed in its entirety, leave the
"live" option selected, use the check boxes to select which days to play the feed, specify a start and
end date if desired and click the 'Add' button at the bottom of the window.
To play only part of a live feed, leave the top section on the "live" option and then uncheck the box
labeled 'Use Complete Feed.' Once the box is unchecked, the Local Air Start and End time will
become editable. Keep in mind that the Start and End times must fall within the original feed times.
To delay a feed, select the "delayed" option from the top section. A drop down box will become
available in the second section allowing you to choose how many days (up to seven) after the
original feed to schedule the playback. In addition to how many days to delay the feed, you may
also specify a custom start time and play only a partial feed as in the previous step except that you
must start at the beginning of the delayed feed.
To capture a network feed for later playback, select the "record" option from the top section. As in
the partial feed option, you can specify whether to capture the entire program or specify custom
start and end times to record only part of the feed.
35
www.picodigital.com
Figure 24 - Live Feed Time Settings
Figure 25 - Delayed Feed Settings
R830001-2001, REV. C
TOLL FREE
800.421.6511
Advertisement
Table of Contents
