Pico Digital XDS-PRO SERIES User Manual page 54

XDS-PRO Satellite Receivers
Option
SHOW
SET
MODE
FBC
LNB
SR
LNBV
CLEAR
SECOND
SPAN
TUNER2 Command: Only valid for PRO receivers with 2 tuners. See TUNER command for usage.
54
www.picodigital.com
Argument
[ENABLE/DISABLE]
[kHz],[sps]
[DVB-S, DVB-S2-QPSK,
DVB-S2-8PSK]
[kHz], [sps], [mode],
[uplink_id]
[kHz]
[sps]
[ON/OFF]
[0/1]
[kHz]
Table 23 - TUNER Command
Set receiver terrestrial mode
Shows various technical data regarding the specified port.
Sets the tuners radio frequency to [kHz] and the tuner's
symbol rate to [sps].
Set Modulation mode
Set fallback carrier parameters
Sets the tuner's LNB offset to [kHz].
Sets the tuner's symbol rate to [sps].
Sets LNBV to ON or OFF depending on argument.
Clears all tuner statistics.
Second tuner disable/enable.
How wide to allow tuner to search when looking
Action
TOLL FREE
R830001-2001, REV. C
800.421.6511